Abstract: 3D printing technology is widely used in the manufacturing of fine ceramic fields due to its simple operation, rapid molding, and applications in preparation of complex structures. In this paper, the characteristics of different 3D printing technologies in ceramic preparation were reviewed based on the material morphology of 3D printing ceramics. The application and mechanism of binder and dispersant applied in direct ink writing, stereolithography and inkjet printing 3D printing technology of ceramics were introduced, and these additive components of water based and non-water based were summarized and discussed, aiming to provide reference for the preparation of high-performance ceramic samples via 3D printing technology.
Key words: ceramic 3D printing, slurry, binder, dispersant, water based, non-water based
Declaration: This article is provided by CERADIR™ users or obtained from Internet, the content does not represent the position of CERADIR™. We are not responsible for the authenticity/accuracy of the article, especially the effects of the products concerned. This article is for study only, it does not constitute any investment or application advice. For reprinting, please contact the original author. If it involves the copyright and/or other issues, please contact us and we will deal with it asap! CERADIR™ has the interpretation of this declaration.
